Hunter MP Rotator MP1000 Nozzle – 90–210° (Female)
Small to medium turf areas often need controlled coverage without applying water too quickly.
The Hunter MP Rotator MP1000 applies water slowly and evenly using multiple rotating streams, improving uniformity and reducing runoff.
This model covers a 90–210° arc and is suited to partial-circle areas with short to medium spacing.
What this is used for
The Hunter MP Rotator MP1000 is a multi-stream rotating spray nozzle used on standard spray bodies.
- Small to medium lawn and turf areas
- Partial-circle spray zones
- Systems designed with matched precipitation
- Replacing fixed spray nozzles without changing pipework
What to check before you buy
- Arc range: Adjustable from 90° to 210°.
- Radius range: 2.5 to 4.6 metres (manufacturer stated).
- Thread type: Female thread to suit standard spray bodies.
- Operating pressure: Best performance is achieved at 2.8 bar.
- Zone consistency: Use only standard MP Rotators within the same precipitation family on a zone.
Important precipitation note
MP1000 nozzles apply approximately 10 mm/hr, matching standard MP Rotators such as MP2000, MP3000, and MP3500.
They should not be mixed with higher-precipitation MP Rotators such as MP800 or MP815 on the same zone.
Key features
- Low precipitation rate to support better soil absorption
- Matched precipitation across standard MP Rotator models
- 90–210° adjustable arc for partial coverage
- 2.5–4.6 m radius for short to medium spacing
- Female thread suits standard spray bodies
Specifications
- Brand: Hunter
- Series: MP Rotator
- Model: MP1000
- Arc range: 90–210°
- Radius: 2.5–4.6 m
- Approx. precipitation: 10 mm/hr
- Thread: Female
- Recommended pressure: 2.8 bar
Compatibility and related parts
This nozzle is designed for use on spray bodies suitable for MP Rotators.
- Spray bodies suitable for MP Rotators
- Pressure regulated spray bodies set to 2.8 bar
- Zone filtration for spray irrigation systems
Need a hand choosing?
If you’re deciding between MP1000 and MP2000, or want to confirm spacing for a partial-circle area, tell us your head-to-head distances and layout. We’ll help you choose the right nozzle.