When spray bodies need extra height, stability and correct installation become even more important.
The Hunter Pro-Spray Side Inlet 300 mm pop-up is designed for deeper turf, landscaped areas, and situations where finished ground levels sit well above the pipework.
The side inlet allows use with swing joints, helping maintain alignment and reduce stress on fittings.
What this is used for
The Hunter Pro-Spray Side Inlet 300 mm is a tall pop-up spray body used in irrigation systems where additional riser height is required.
- Deep turf or thick lawn varieties
- Landscaped garden beds with mulch or soil build-up
- Installations using swing joints for accurate positioning
- Spray zones running fixed spray nozzles or MP Rotators
What to check before you buy
-
Pop-up height: 300 mm riser. Confirm this height is genuinely required to avoid instability or damage.
-
Inlet type: Side inlet design, typically paired with swing joints.
-
Pressure management: This is a standard (non-regulated) body. MP Rotators usually require pressure regulation at 2.8 bar.
-
Nozzle type: Confirm whether you are using fixed spray nozzles or MP Rotators and design zones accordingly.
Important pressure note for MP Rotators
If this body is used with MP Rotator nozzles, pressure should be regulated elsewhere in the system. In higher pressure systems, a pressure regulated spray body is often the safer choice.
Key features
- 300 mm pop-up height for deep turf and landscaped finishes
- Side inlet design suited to swing joint installations
- Reliable wiper seal to reduce leakage and debris entry
- Heavy-duty spring for consistent pop-up and retraction
- Compatible with fixed spray nozzles and MP Rotators
Specifications
-
Brand: Hunter
-
Series: Pro-Spray
-
Pop-up height: 300 mm
-
Inlet: ½" female BSP, side inlet
-
Application: Spray irrigation systems
Compatibility and related parts
This spray body is commonly used with MP Rotator nozzles and swing joints in installations requiring greater height and flexibility.
Need a hand choosing?
If you’re unsure whether a 300 mm pop-up is necessary, or whether you should use a pressure regulated body instead, tell us about your site conditions and nozzle choice. We’ll help you avoid over- or under-specifying the install.
Irrigation
Fittings
Pumps & Accessories
Ponds, Dams & Aquaculture
Filters & Water Treatment
Browse by Solution
Irrigation
Fittings
Pumps & Accessories
Ponds, Dams & Aquaculture
Filters & Water Treatment
Browse by Solution
Controllers & Tap Timers
Communication Cables
Irrigation Solenoids
Turf Irrigation
Drip Irrigation Systems
Aeration
Pond Pumps
Pond Filters
Water Filter Parts
Domestic
Commercial
Agricultural
Industrial
Solar Pumps
