Hunter MP Rotator Corner Nozzle – 45–105° (Female)
Corner areas are often overwatered or missed completely when standard spray nozzles are used.
The Hunter MP Rotator Corner nozzle is designed specifically for tight corner sections, applying water slowly and evenly using multiple rotating streams.
This model covers a 45–105° arc, making it ideal for precise corner coverage without overspray.
What this is used for
The Hunter MP Rotator Corner nozzle is a multi-stream rotating spray nozzle designed for corner and irregular-shaped areas.
- Lawn and turf corners
- Garden beds with tight angles
- Spray zones where overspray must be avoided
- Upgrading fixed spray nozzles in corner positions
What to check before you buy
- Arc range: Adjustable from 45° to 105°.
- Radius range: 2.5 to 4.5 metres (manufacturer stated).
- Thread type: Female thread to suit standard spray bodies.
- Operating pressure: Best performance is achieved at 2.8 bar.
- Zone consistency: Use only standard MP Rotators within the same precipitation family on a zone.
Important precipitation note
MP Corner nozzles apply approximately 10 mm/hr, matching standard MP Rotators such as MP1000, MP2000, and MP3000.
They should not be mixed with higher-precipitation MP Rotators such as MP800 or MP815 on the same zone.
Key features
- Low precipitation rate to support better soil absorption
- Designed specifically for corner coverage
- 45–105° adjustable arc for tight angles
- 2.5–4.5 m radius for small to medium spacing
- Female thread suits standard spray bodies
Specifications
- Brand: Hunter
- Series: MP Rotator
- Model: MP Corner
- Arc range: 45–105°
- Radius: 2.5–4.5 m
- Approx. precipitation: 10 mm/hr
- Thread: Female
- Recommended pressure: 2.8 bar
Compatibility and related parts
This nozzle is designed for use on spray bodies suitable for MP Rotators.
- Spray bodies suitable for MP Rotators
- Pressure regulated spray bodies set to 2.8 bar
- Zone filtration for spray irrigation systems
Need a hand choosing?
If you’re unsure whether a corner MP Rotator or a standard arc nozzle is better for your layout, tell us the shape and spacing of the area. We’ll help you choose the right option and avoid overspray.