Hunter MP Rotator MP2000 Nozzle – 360° (Female)

Medium-sized lawn areas need even coverage without applying water faster than the soil can absorb.

The Hunter MP Rotator MP2000 applies water slowly and evenly using multiple rotating streams, improving uniformity and reducing runoff.

This 360° model is designed for full-circle coverage where medium head spacing is required.

What this is used for

The Hunter MP Rotator MP2000 is a multi-stream rotating spray nozzle used on standard spray bodies.

• Medium lawn and turf areas
• Full-circle spray zones
• Systems designed with matched precipitation
• Replacing fixed spray nozzles without changing pipework

What to check before you buy

• Arc: Fixed 360° full circle.
• Radius range: 4.0 to 6.4 metres (manufacturer stated).
• Thread type: Female thread to suit standard spray bodies.
• Operating pressure: Best performance is achieved at 2.8 bar.
• Zone consistency: Use only standard MP Rotators within the same precipitation family on a zone.

Important precipitation note

MP2000 nozzles apply approximately 10 mm/hr, matching standard MP Rotators such as MP1000, MP3000, and MP3500.

They should not be mixed with higher-precipitation MP Rotators such as MP800 or MP815 on the same zone.

Key features

• Low precipitation rate to support better soil absorption
• Matched precipitation across standard MP Rotator models
• 360° full-circle coverage
• 4.0–6.4 m radius for medium spacing
• Female thread suits standard spray bodies

Specifications

• Brand: Hunter
• Series: MP Rotator
• Model: MP2000
• Arc: 360°
• Radius: 4.0–6.4 m
• Approx. precipitation: 10 mm/hr
• Thread: Female
• Recommended pressure: 2.8 bar

Compatibility and related parts

This nozzle is designed for use on spray bodies suitable for MP Rotators.

• Spray bodies suitable for MP Rotators
• Pressure regulated spray bodies set to 2.8 bar
• Zone filtration for spray irrigation systems

Need a hand choosing?

If you’re deciding between MP2000 and MP3000 for a full-circle area, tell us your head-to-head spacing and layout. We’ll help you match the correct nozzle.